aircraft hangars and airplane hangar, design, manufacture, delivery and installation by Reid Steel worldwide steel framed buildings

aircraft hangars and airplane hangar design, manufacture, delivery and installation by Reid Steel worldwide steel framed buildings

Hangar Door Types

We think your doors should be full width, though you can choose lesser openings. If you need less than the full width at any time, choose type 1 or 2. If you need the full width open, choose 3. If there is space for outriggers only to one side, choose 4. If you need more height at the centre choose type 5 (though it is better to make the whole opening higher). If you need a tailgate with crossover doors type 6, or one-side outrigger doors type 7, this is possible though more difficult. If there is no space for outriggers but you need full width opening choose type 8.

Choose Electrically Operated (with manual back-up)  or Manually Operated (Manual is recommended for smaller doors and places where the electrical supply is not very reliable).

Type 1. MULTI LEAF CROSSOVER DOORS
All the entrance can be opened, but not the full width at the same time.

2-track, 4-leaf 
multi leaf cross over doors 2-track, 4-leaf
3-track, 6-leaf
multi leaf cross over doors 3-track, 6-leaf
4-track, 8-leaf 
multi leaf cross over doors 4-track, 8leaf
1/2 open right
multi leaf cross over doors 2-track, 4-leaf, 1/2 open
2/3 open right
multi leaf cross over doors 3-track, 6-leaf, 2/3 open right
3/4 open right
multi leaf cross over doors 4-track, 8-leaf, 3/4 open right
1/2 open centrally
multi leaf cross over doors 2-track, 4-leaf, 1/2 open centrally
2/3 open centrally
multi leaf cross over doors 3-track, 6-leaf, 2/3 open centrally
3/4 open centrally
multi leaf cross over doors 4-track, 8-leaf, 3/4 open centrally
1/2 open left
multi leaf cross over doors 2-track, 4-leaf, 1/2 open left
2/3 open left
multi leaf cross over doors 3-track, 6-leaf, 2/3 open left
3/4 open left
multi leaf cross over doors 4-track, 8-leaf, 3/4 open left

Type2. WIDE LEAF CROSSOVER DOORS
All the entrance can be opened, but not the full width at the same time.

2-track, 2-leaf
wide leaf crossover with 2-track, 2-leaf
3-track, 3-leaf
wide leaf crossover with 3-track, 3-leaf
4-track, 4-leaf
wide leaf crossover with 4-track, 4-leaf
1/2 open right
wide leaf crossover with 2-track, 2-leaf, 1/2 open right
2/3 open right
wide leaf crossover with 3-track, 3-leaf, 2/3 open right
3/4 open right
wide leaf crossover with 4-track, 4-leaf, 3/4 open right
closed
wide leaf crossover with 2-track, 2-leaf, closed
1/3 open centrally
wide leaf crossover with 3-track, 3-leaf, open centrally
1/2 open centrally
wide leaf crossover with 4-track, 4-leaf, 1/2 open centrally
1/2 open left
wide leaf crossover with 2-track, 2-leaf, 1/2 open left
2/3 open left
wide leaf crossover with 3-track, 3-leaf, 2/3 open left
3/4 open left
wide leaf crossover with 4-track, 4-leaf, 3/4 open left

Type 3. OUTRIGGERS DOORS (Symetrical)
Used where the entire entrance width, or most of it, needs to be open. Fewer leaves give lower costs.
Outriggers are needed each side

outriggers doors
2-track, 4-leaf 
outriggers both sides with 2-track, 4-leaf
3-track, 6-leaf 
outriggers both sides with 4-track, 8-leaf
4-track, 8-leaf 
outriggers both sides with 3-track, 6-leaf

Type 4. OUTRIGGERS DOORS (One side only)
Used where the entire entrance width, or most of it, needs to be open

outriggers doors, one side only
4-track, 4-leaf, 4-track, 8-leaf 
outriggers one side with 4-track, 4-leaf
3-track, 3-leaf, 3-track, 6-leaf
outriggers one side with 3-track, 6-leaf

Type 5. OUTRIGGERS DOORS (With centre tailgate)

outriggers doors, with centre tailgate
2-track, 4-leaf 
outriggers both sides with 2-track, 4-leaf and centre tailgate
3-track, 6-leaf
outriggers both sides with 3-track, 6-leaf and centre tailgate
4-track, 8-leaf 
outriggers both sides with 4-track, 8-leaf and centre tailgate

Type 6. CROSSOVER DOORS (With centre tailgate)

crossover doors with centre tailgate
4-track, 8-leaf (typical)
3/4 can be open at any time

* Note: It is a special and expensive case if the doors have to cross a tailgate, but we can do it.

Type 7. OUTRIGGER DOORS (One side only, with centre tailgate)

outriggers doors one side only
Outrigger for entire entrance width opening.
4-track, 8-leaf (typical)

* Note: It is a special and expensive case if the doors have to cross a tailgate, but we can do it.

Type 8. VERTICAL LIFT DOORS
An expensive solution, if no outriggers can be used and
full width is needed (Posts retract)

vertical lift door vertical lift door with tailgate
Retractable columns probably needed Also available with tailgate

Type 9. FOLDING SHUTTER DOORS
Single or Bi-folding

folding shutter door
Appropriate for light hangars
(bunching uses 10% of the opening)


Contact Us
Name:
Email:
Telephone:
Enquiry:
contactusbottom
 

If you have any questions please contact us or use our specific aircraft hangar enquiry form.





[home]  [about us]  [hangar enquiry]  [contact us

[Clear Entry Hangars]  [military aircraft hangars]  [large aircraft hangars]  [medium size aircraft hangars]  [small aircraft hangars]  

[hangar doors]  [Roofing and Wall Cladding]  [Flooring]  [Hangar Styles]  [other services]  [about cookies]  [site map]



John Reid and Sons (Structsteel) Ltd. Strucsteel House, 6-106 Reid Street, Christchurch, DORSET BH23 2BT, England
Tel: +44 (0)1202 483 333 Fax: +44 (0)1202 470 103 E-mail: contact us

Chairman and Managing Director:  Michael Reid MBE FinstD
Technical Director: 

Rollo Reid C.Eng FIstrucE MICE FinstD

Drawing Office Director:  Tim Reid
Marine Division Director:  Peter Reid
Contracts Director: Simon Boyd FinstD

© Copyright aircraft hangars and airplane hangar design  manufacture delivery and installation by Reid Steel worldwide steel framed buildings by John Reid and Sons (Structsteel) Ltd. - All rights reserved